Free tool and guide
Build to rent, what it is and how the numbers work
Build to rent is housing built to be rented from day one, as one community with one owner. Enter a project below to see its yield on cost.
Build to rent (BTR) is a development model where homes, usually detached homes, townhomes or other attached homes, are built to be rented from day one and owned and operated by one landlord as a community, instead of being sold to individual buyers. The test of a BTR deal is its yield on cost: stabilized net operating income divided by total development cost, compared with the cap rate a buyer would pay.
Build-to-rent yield-on-cost calculator
Enter the land and site cost, the construction cost per home, rent, vacancy and operating costs. See the total development cost, stabilized NOI, yield on cost and the value at a cap rate you choose. It runs in your browser: your numbers are not uploaded, saved or tracked, and there is no sign-up.
- Total development cost
- $32,256,000
- $268,800 per home
- Effective gross income
- $3,085,920
- Rent less vacancy, plus other income
- Operating expenses
- $828,014
- $6,900 per home
- Stabilized NOI
- $2,257,906
- $18,816 per home
- Yield on cost
- 7.00%
- Stabilized NOI divided by total development cost
- Value at the cap rate tested
- $37,631,760
- NOI divided by that cap rate
- Value less cost
- $5,375,760
- 16.7% of cost
- Yield on cost less cap rate
- 1.00 points
- The development spread
Arithmetic only, with no market benchmarks. This is not a loan quote or advice.
What build to rent is
In a build-to-rent project, one owner builds a group of homes and keeps them as rentals. The homes are designed for renters, the community is leased and managed as a single property, and the owner earns rent instead of selling lot by lot. The product is a mix of detached homes, townhomes and other attached homes, and attached homes were a large share of built-for-rent homes in NAHB's 2016 data. The roads, utilities and shared amenities are finished as part of the build.
Three things set it apart. The homes are built for the long-term rental market, so layouts and finishes are chosen for operating cost. The owner is also the developer, or buys the finished community from one, so a single income stream sits behind the whole site. And the exit is a stabilized rental community, which is valued on its income and not home by home.
Build to rent, scattered-site rental and multifamily compared
| Model | How it is acquired | What stands out in operations |
|---|---|---|
| Build to rent | Built as a rental community, or bought finished from the developer | One site, one manager, per-home roofs and systems |
| Scattered-site single-family rental | Homes bought one at a time, or in bulk, across a market | Homes spread across many streets, with different ages and conditions |
| Multifamily | Built or bought as apartment buildings | Shared structure and systems, costs per building |
The lines blur. A scattered-site portfolio can include homes that were built for rent, and a BTR community can be sold to an investor who then runs it as part of a larger SFR portfolio. For how the multifamily side is underwritten, see multifamily.
What the data says about built-for-rent homes
Public data counts single-family built-for-rent homes, not every BTR project, so read these figures as the single-family part of the market. Each is from the National Association of Home Builders (NAHB), which analyzes Census Bureau data. Checked 2026-11-10.
| Figure | Period | Source |
|---|---|---|
| About 68,000 single-family built-for-rent starts, down 19% from an estimated 84,000 in 2024 | Calendar 2025 | NAHB Eye on Housing, March 12, 2026 |
| Built-for-rent was 7% of single-family starts on a four-quarter average, against a 2.7% average from 1992 to 2012 | Four quarters to Q4 2025 | NAHB Eye on Housing, March 12, 2026 |
| NAHB counts only homes built and held by the builder for rent. Homes built and sold to another party for rental use are excluded, and NAHB estimates they may add another 3% to 5% of single-family starts | Method note | NAHB, August 21, 2024 |
| 77% of built-for-rent single-family homes were townhouses or other attached homes, against 11% of for-sale homes | 2016 Survey of Construction | NAHB Eye on Housing, August 21, 2019 |
| Median built-for-rent home of 1,500 square feet, against 2,419 square feet for for-sale homes. 52% had one or two bedrooms, against 6% of for-sale homes | 2016 Survey of Construction | NAHB Eye on Housing, August 21, 2019 |
Two cautions. The 2016 product mix is old, and builders have changed what they build since, so use it to see that BTR skews smaller and more attached than for-sale housing, not as a design spec. And NAHB notes that quarter-to-quarter moves in this series are usually not statistically significant because the segment is small, so the annual figures are the safer read.
How the numbers work: yield on cost and the development spread
A BTR developer is judged on two numbers. Yield on cost = stabilized NOI / total development cost. Cost includes the land, site work and utilities, construction, soft costs and financing. NOI is the income once the community is leased up: rent plus other income, less vacancy, taxes, insurance, repairs and turns, management and reserves.
The second is the development spread = yield on cost less the cap rate a buyer would pay for the stabilized income. A positive spread is the margin the developer earns for taking construction, lease-up and entitlement risk. A negative spread means the finished community would sell for less than it cost.
The figures loaded in the tool, in round numbers: 120 homes, $4.8 million for land and site work, $200,000 a home to build, and soft costs and financing of 12% on top. Total cost is ($4,800,000 + 120 x $200,000) x 1.12 = $32,256,000, or $268,800 a home. Rent is $2,200 a month on every home, with $75 a month of other income and 6% vacancy. Operating costs are $5,100 a home plus a management fee of 7% of income. Stabilized NOI is $2,257,906, so the yield on cost is 7.00%. At a 6% cap rate the community is worth $37,631,760, which is $5,375,760 over cost, and the development spread is 1.00 point. Replace every input with your own.
The tool shows the stabilized year only. It does not model the lease-up period, construction interest or the draw schedule, so the soft cost percentage has to carry them. For the same arithmetic on an existing property, see the NOI calculator and the cap rate calculator.
What to check when underwriting a BTR deal
- Per-door costs, not per-building. Each home has its own roof, HVAC and exterior, so repairs, turns and replacements are per door. Use the operator's actual per-door history where it exists.
- Property taxes after completion. Check how the assessor treats a finished rental community and whether a sale reassesses it. Taxes are the largest single cost line in the figures worked out above.
- Infrastructure and entitlements. The land, roads, utilities and approvals are paid before a single home earns rent. See what is in the site budget and what the approvals depend on.
- Lease-up pace. The calculator assumes a leased-up community. Underwrite how fast homes lease and what carrying cost is paid until they do.
- Rent comparables. Test the rent against comparable single-family rents in the submarket, not against apartment rents.
- Debt. Compare the NOI with the loan using the DSCR calculator and the cash-on-cash calculator, and check when the construction loan converts or must be refinanced.
- Exit. Decide whether the plan is to hold, sell the community or sell it into a larger portfolio, and test the value at several cap rates. A "good" cap rate depends on the market, the product and the buyer, so no single number is offered here.
For BTR owners and operators
BTR operations are repetitive per-door work: tracking rents and renewals, turn costs, repair tickets, taxes and insurance by site. That is the work PSV builds AI employees for. See AI for build-to-rent and SFR for per-door underwriting, scattered-site aggregation and operations, or the AI underwriting guide for how a first-pass model is built from the documents.
Sources
- NAHB Eye on Housing, "Weaker Conditions for Single-Family Built-for-Rent Housing," March 12, 2026. Checked 2026-11-10.
- NAHB, "Builders Add Housing Supply Through Single-Family Built-for-Rent Construction," August 21, 2024. Checked 2026-11-10.
- NAHB Eye on Housing, "Contrasting Built-for-Rent and For-Sale New Single-Family Homes," August 21, 2019. Checked 2026-11-10.
Frequently asked
- What is build to rent?
- Build to rent (BTR) is a development model where homes are built to be rented from the start, and owned and operated by one landlord, instead of being sold to individual buyers. Most BTR is single-family detached homes, townhomes or small attached homes laid out as one community.
- What is the difference between build to rent and single-family rental?
- Single-family rental (SFR) is the broad category: any house rented out. Build to rent is the part of it that was built for renters, usually as a planned community. Scattered-site SFR is the other common form: homes bought one by one across a market, so they are managed spread out, not on one site.
- How do you underwrite a build-to-rent deal?
- Work out the total development cost, the stabilized net operating income from rent, other income, vacancy and operating costs, and divide the income by the cost to get the yield on cost. Then compare the yield to the cap rate a buyer would pay for the stabilized income. The calculator above does the arithmetic with your own inputs.
- What is yield on cost in build to rent?
- Yield on cost is stabilized net operating income divided by total development cost, including land, site work, construction, soft costs and financing. It is the return the project earns on what it cost to build, before any sale or refinance.
- What is the development spread?
- The development spread is the yield on cost less the cap rate that stabilized income would trade at. A positive spread means the finished community is worth more than it cost to build. A negative spread means it is worth less.
- How is build to rent different from multifamily?
- The product is smaller and lower density: single-family homes or townhomes, often with private yards or garages, on land the developer must finish with roads and utilities. Operations also differ, because each home has its own roof, systems and exterior, so repair and turn costs are per home and not per building.
Keep reading
AI for build-to-rent and SFR
Per-door underwriting and portfolio work for BTR and single-family rental owners.
NOI calculator
Net operating income from rent, vacancy and expenses.
Cap rate calculator
Cap rate and what NOI is worth at a given rate.
Pacific Software Ventures built this tool and guide, and sells AI consulting and training to commercial real estate firms. This is general education, not investment, legal or tax advice.
Next step
Doing this on every deal? Let AI do the first read.
Ten minutes. An honest read on where AI would save your team time, and which option fits, including when it is not us.